Left to its own devices, rainfall can be a costly and destructive force on a property. By flagging problems and fixing them early, a property owner can save thousands on property damage. Stormwater management is summarized into three easy steps:
1. Identify the problem.
2. Install the solution.
3. Move on.
With the right parts in place, you will never have to think about the problem again.
1. Identify the Problem
The cause of a problem is never too far from the evidence. Just ask yourself, “Where is the water going?”
Oftentimes, a drainage system will work for years or decades before falling into decay. This is often due to outdated materials. Metal may appear hardy but will give in to corrosion and rust after years of use. Cheap and light plastics break down under the weight of heavy rainfall, especially when the drains become cluttered with debris. These parts must be swapped out with PVC or HDPE: reliable, water-tight materials that last longer than the alternatives
Large land spaces require occasional maintenance over the years as water begins to pool in different areas. Golf courses, parking lots, highways, ball fields, and business fronts are common places for water-pooling issues to come up. New drainage devices must be installed to help with the target areas.
If not properly installed, stormwater drains become stuffed with dirt, pine needles, and trash. These systems can be modified or replaced to include snouts, clean-outs, and valves to manage the debris and prevent clogging.
2. Install the Solution.
Once the problem is identified, all that’s left is to replace what’s broken. The replacement parts must fit the exact parameters of the existing system, form a water-tight connection, and withstand the environmental factors of the area. In some cases, the parts can be purchased at local department stores, but when a unique part is needed, it must be built-to-spec. This is Specified Fittings’ forte.
Our catch basins can be built to any parameters between 6″ and 48″ (12″ wider than most competitors offer). We recommend either SDR35 or Sch40: sturdy, high-quality materials that most piping companies don’t have access to. Our catch basins are designed with internal snouts to expel debris.
When two pipes of different dimensions must interconnect, this is where an adapter comes in. No matter the shape or material, so long as the diameters fall between 3″ and 12″, Specified Fittings can build it.
The Specified Fittings CAD team will design and build what you need, making use of the latest technology to make your drainage clean, efficient, and reliable. We may make use of notches, weirs, gates, valves, clean-outs, shear gates, and snouts to create the piece that meets your needs.
3. Move on
A lot of factors go into installing a stormwater management system, but the best solution is a final solution. Once installed, the drainage system will keep doing what it does best.
If you require special parts, go to the experts with access to the highest quality materials and manufacturing tools. See more info on our stormwater management solutions.