Corrosion-resistant and longer lasting, PVC pressure pipe is proven to be more efficient and cost-effective than traditional pipe fitting materials for numerous cities and communities worldwide.

Order custom PVC fittings from C-900 to Schedule 40/80 to SDR Series.

Our Spec-Loc product line utilizes the Bulldog Restraint System and is available in C-900 and IPS.
Our Spec-Loc product line utilizes the Bulldog Restraint System and is available in C-900 and IPS.

Custom Fittings for C-900 Pipe

Custom pipe fiittings for C900 pipe through 60″ are available from Specified Fittings and exclusively use the Reiber locked-in, steel backed gasket. Select from these and other custom PVC fittings. These gaskets are generally of SBR composition but are also available in EPDM, FKM, Viton, Nitrile, and CR—to name a few. Remember large diameter PVC fittings for sewer and force main sewer applications.  Contact our Sales Department for more information today!

View our product lines below.

Specifications:

Diameter: 1/8″ – 24″
Class: SDR64-SDR17
Configuration: Gasketed, Solvent Weld, Flanged

Short Form Specifications

Injection molded SDR 21 Gasketed PVC Fittings for IPS PVC Pipe:

 

SDR 21 gasketed IPS injection molded fittings are compatible with IPS PVC Pipe made to ASTM D2241, ASTM D1785, and ASTM D2665.  Fittings shall be made of PVC compound meeting the requirements of cell class 12454 per ASTM D1784.  Gasketed joints shall conform to ASTM D3139.  Gaskets shall conform to ASTM F477.  Fittings conform to and are NSF 14 and NSF 61 listed.

 

 

Fabricated FITTINGS FOR IPS SDR Series pipe 

 

Fabricated fittings shall be made from PVC pipe made to ASTM D2241 and SDR of user’s choice or a combination of molded and fabricated subcomponents.   PVC compound shall meet the requirements of cell class 12454 per ASTM D1784.  Solvent weld bell or gasket-end fittings are option of user.  Solvent weld bells shall be compatible with IPS SDR Series pipe. Gasket bells shall conform to ASTM D3139 with gaskets conforming to F477. Gaskets shall be locked-in style. All fittings shall be from NSF-61 materials for use in potable water systems.

 

Specifications:

Diameter: 4″ – 60″
Class: DR51 – DR14
Configuration: Gasketed, Solvent Weld, Flanged

Short Form Specification

GASKETED INJECTION MOLDED FITTINGS FOR C-900 PIPE
Gasketed molded fittings for 4” through 8” C-900 pipe may be one-piece or a combination of injection molded components, and made from PVC compound meeting cell class 12454 per ASTM D1784. Fittings shall conform to the requirements of DR 18. Molded fittings shall meet the requirements of AWWA C907.  Gasketed joints shall conform to ASTM D3139 with gaskets conforming to F477.  Fittings shall be listed and meet NSF 61.

 

Fabricated FITTINGS FOR C900 pipe 

Fabricated fittings shall be made from PVC pipe made to AWWA C900 and DR of user’s choice.   PVC compound shall meet the requirements of cell class 12454 per ASTM D1784.  Solvent weld bell or gasket-end fittings are option of user. Solvent weld bells shall be compatible with C900 pipe. Gasket bells shall conform to ASTM D3139 with gaskets conforming to F477. Gaskets shall be locked-in style. All fittings shall be from NSF-61 materials for use in potable water systems. Configurations requiring external fiberglass reinforcement shall conform to quality requirements of ASTM D2563.

Specifications:

Diameter: 4″ – 24″ (C900), 3″-8″ (IPS)
Class: DR51 – DR14
Configuration: Gasketed, Solvent Weld, Flanged

Short Form Specifications

C900 Short Form Specs:

Fabricated FITTINGS FOR C900 pipe 

Fabricated fittings shall be made from PVC pipe made to AWWA C900 and DR of user’s choice.   PVC compound shall meet the requirements of cell class 12454 per ASTM D1784.  Gasket bells shall conform to ASTM D3139 with gaskets conforming to F477. Gaskets shall be locked-in style incorporating Bulldog integral joint restraint system. All fittings shall be from NSF-61 materials for use in potable water systems. Configurations requiring external fiberglass reinforcement shall conform to quality requirements of ASTM D2563.

Specifications:

Diameter: 1/8″ – 24″
Class: Sch40, Sch80, Sch120, in PVC and CPVC
Configuration: Gasket, Solvent Weld, Flanged

Short Form Specifications

Fittings for Schedule 40 PVC Pipe
All fittings for 1/4″ through 24″ Schedule 40 pipe shall be one-piece injection molded per ASTM D2466, or fabricated from Schedule 40 PVC pipe made to ASTM D1785 and a PVC compound meeting requirements of cell class 12454 per ASTM D1784, or a combination of molded and fabricated subcomponents. Solvent weld, threaded or gasket end fittings are option of user. Solvent weld bells shall be compatible with IPS PVC pipe as stated in ASTM D2241. Threaded end connections shall meet the requirements of ASTM D2464. Gasket bells shall conform to ASTM D3139 with gaskets conforming to ASTM F477. All fittings are to be made from NSF-approved material.  Gaskets shall be locked-in style.

Fittings for Schedule 80 Pipe

All fittings for 1/4″ through 24″ Schedule 80 pipe shall be one-piece injection molded per ASTM D2467 or ASTM D2464, or fabricated from Schedule 80 PVC pipe made to ASTM D1785 and  a PVC compound meeting requirements of cell class 12454 per ASTM D1784, or a combination of molded and fabricated subcomponents. Solvent weld bells shall be compatible with IPS PVC pipe as stated in ASTM D2241. Solvent weld, threaded or gasket-end fittings are option of user. Threaded end connections shall meet the requirements of ASTM D2464. Gasket bells shall conform to ASTM D3139 with gaskets conforming to ASTM F477. All fittings are to be made from NSF-approved material.  Gaskets shall be locked-in style.

 

About Our Locked-In Gaskets

Specified Fittings’ locked-in gasket is quickly and easily joined together by simply inserting the spigot end of the pipe into the bell socket of the fitting. Multi-lip design of the sealing gasket provides a positive seal that is pressure and vacuum tight. Retained ring design prevents fish mouthing or dislocation of the gasket. Sealing gasket is exceptionally smooth and completely free of core marks. Selection of the correct material to be applied to a sealing system will depend not only on the characteristics of the fluid to be contained but also the properties of the surrounding environment. Gaskets may be made with a variety of different compounds, depending upon the application. Composition of the standard gasket is SBR, but we also offer EPDM, nitrile, Neoprene and Viton

Need a submittal?

Our CAD Techs, are glad to assist you with any drawings you may need for your structures--standard or custom.

Brad Sukolsky: bsukolsky@specfit.com
Derek Eirish: deirish@specfit.com